Include "18F4620.inc"
' Mapping defines for midi-events on pin outputs and inputs:
' we use 2 boards for Ekla!

    $define Hol13      PORTA.2    ' output 1 op het PCB!        pin4
    $define Vel13      PORTA.1       '       ok     pin3
    $define Hol12      PORTA.0       '       ok     pin2
    $define Vel12      PORTA.3       '       ok     pin5

    $define Hol11      PORTA.4
    $define Vel11      PORTA.5
    $define Hol10      PORTE.0
    $define Vel10      PORTE.1

    $define Hol9      PORTE.2
    $define Vel9      PORTB.4
    $define Hol8      PORTB.3
    $define Vel8      PORTB.2

    $define Hol7      PORTB.1
    $define Vel7      PORTB.0
    $define Hol6      PORTD.7
    $define Vel6      PORTD.6

    ' for sper5 it ought to  be:
    $define Hol5      PORTD.5         ' noot 5 = 89
    $define Vel5      PORTD.4
    $define Hol4      PORTC.5         ' noot 4 = 88
    $define Vel4      PORTC.4

    $define Hol3      PORTD.3         ' noot 3 = 87
    $define Vel3      PORTD.2
    $define Hol2      PORTC.0         ' noot 2 = 86
    $define Vel2      PORTC.1         ' pwm?

    $define Hol1      PORTC.2         ' noot 1 = 85   pwm?
    $define Vel1      PORTC.3         ' output 13 op het PCB
    $define Hol0      PORTD.0         ' noot 0 = 84
    $define Vel0      PORTD.1         ' output 14 op het PCB

    'red LED for debug:
    $define Debug_Led   PORTB.5   ' for testing - red led - watchdog - pin 38